CIC-152-N / CIC-152-4: Dual Control Dosing/Injection TDS/EC

The CIC controllers can monitor and control dosing and/or injection systems. This unit will control 2 separate systems.

FEATURES

  • Monitors and controls dosing or injection systems
  • Large, bright tri-color L.E.D. display
  • Two adjustable set points keep TDS levels within a range (maximum and minimum TDS/EC levels)
  • Minimum and maximum control points will activate relay controls via switching dry contacts
  • The CIC-152 can control two different devices (e.g., a pump and a valve)
  • Two alarms (maximum and minimum levels) can be set independently of the control points
  • Digital calibration
  • On-screen temperature display
  • On-screen range & control indicator lights (green, yellow, or red)
  • Includes one sensor probe
  • Available with the NaCl conversion factor (model CIC-152-N) or the 442TM conversion factor (model CIC-152-4)

SPECIFICATION

  • TDS Range: 0 – 5000 ppm (CIC-152-N): 0 – 8500 ppm (CIC-152-4)
  • EC Range: 0 – 9999 µS
  • Temperature Range: 1-80oC; 33-176oF
  • Accuracy: ±2% (of the reading)
  • Resolution: 0.1 ppm (0-999); 1 ppm (1000-9999)
  • ATC: Yes (1 – 80 degrees Celsius)
  • Calibration: Digital (by push button)
  • Factory Calibration: 1413 µS
  • Conversion Factor: CIC-152-N: NaCl (avg. 0.5); CIC-152-4: 442 (0.4-0.7)
  • Set Points: Adjustable by push buttons. Control Point 2: Maximum TDS Limit. Control Point 1: Lower TDS Level.
  • Relay Control: The unit will transmit an analog signal (simple switch) via open or closed contacts to a device (e.g. pump/valve) when the ppm/µS level reaches the maximum TDS/EC limit (Control Point 2) or the minimum TDS/EC limit (Control Point 1).
  • The contacts are switched back to the normal position once the TDS returns to the acceptable range
  • Relay Voltage: 5V (attached devices must have their own power supply)
  • Alarm: Two independent alarms (set by the user)
  • Display: Bright 5/8″ L.E.D. display
  • Probe: 1/2″ bushing (NPT), 3 meters (9.8 ft) shielded cable (model SP-1-PSC)
  • Power Source: AC 110V / AC 220V
  • Dimensions: 7.2 x 7.2 x 11.1 cm (2.8 x 2.8 x 4.4 in.)
  • Monitor Weight: 241 g (8.5 oz)
  • Total (Shipping) Weight: 610 g (1 lb 5.5 oz)